SEGA 999-1108 Manuel D’Utilisation
47
Eb. GAS ASSIGNMENTS
This screen enables to set the volume value of the gas pedal (accelerator). The MIN indicates
the volume value when the pedal is not stepped on and the MAX when stepped on.
the volume value when the pedal is not stepped on and the MAX when stepped on.
Reset the volume value on this screen when the operability of the gas pedal is undesirable. Also
newly set the volume value on this screen whenever you have adjusted or replaced the volume.
newly set the volume value on this screen whenever you have adjusted or replaced the volume.
Check the '0' for a position on the screen. If
it is not on the Å» marks above the MIN and
MAX, press the service button to move the >
mark to the UP or DOWN, and press the test
button so that the '0' is positioned just on the
Å» marks.
After testing, select the EXIT and press the
test button. The INPUT ASSIGNMENTS
screen reappears.
it is not on the Å» marks above the MIN and
MAX, press the service button to move the >
mark to the UP or DOWN, and press the test
button so that the '0' is positioned just on the
Å» marks.
After testing, select the EXIT and press the
test button. The INPUT ASSIGNMENTS
screen reappears.
GAS ASSIGNMENTS
(MIN -40 : MAX 40 : DEFAULT 0)
GAS = 0
GAS = 0
0
^ ^
MIN MAX
^ ^
MIN MAX
UP
DOWN
DOWN
> EXIT
SELECT WITH SERVICE BUTTON
AND
PRESS TEST BUTTON
AND
PRESS TEST BUTTON
Ec. BRAKE ASSIGNMENTS
This screen enables to set the volume value of the brake pedal. The MIN indicates the volume
value when the pedal is not stepped on and the MAX when stepped on.
value when the pedal is not stepped on and the MAX when stepped on.
Reset the volume value on this screen when the operability of the brake pedal is undesirable.
Also newly set the volume value on this screen whenever you have adjusted or replaced the
volume.
Also newly set the volume value on this screen whenever you have adjusted or replaced the
volume.
Check the '0' for a position on the screen. If
it is not on the marks above the MIN and
MAX, press the service button to move the >
mark to the UP or DOWN, and press the test
button so that the '0' is positioned just on the
marks.
After testing, select the EXIT and press the
test button. The INPUT ASSIGNMENTS
screen reappears.
it is not on the marks above the MIN and
MAX, press the service button to move the >
mark to the UP or DOWN, and press the test
button so that the '0' is positioned just on the
marks.
After testing, select the EXIT and press the
test button. The INPUT ASSIGNMENTS
screen reappears.
BRAKE ASSIGNMENTS
(MIN -40 : MAX 40 : DEFAULT 0)
BRAKE = 0
BRAKE = 0
0
^ ^
MIN MAX
^ ^
MIN MAX
UP
DOWN
DOWN
> EXIT
SELECT WITH SERVICE BUTTON
AND
PRESS TEST BUTTON
AND
PRESS TEST BUTTON
<
<