Q-Logic 8100 Manuel D’Utilisation

5–Fibre Channel Noninteractive Commands
-tb (Target Beacon On/Off)

5-34

SN0054667-00  C

To show specific target information for a specific target on an adapter, issue the 
following command:

# qaucli -pr fc -t (<hba instance> | <hba wwpn>) (<target wwpn> | 
<target port id>)

Where:

To show the target information on all adapters, issue the following command:

To show the target information on a specific adapter, issue the following 
command:

To show the target information for a specific target on a specific adapter, issue the 
following command:

iiDMA (intelligent interleaved direct memory access) settings include:



—targets | –t applies to all targets.



<speed> indicates the supported intelligent interleave factor: 1, 2, 4, or 

8Gbps.

To start or stop flashing a target’s LED, issue the following command:

# qaucli -pr fc -tb (<hba instance> | <hba wwpn>) (<target wwpn>) 
(<0 | ON> | <1 | PRESET>)

hba instance = Adapter number (use -g command to find)

hba wwpn = World wide port name of the adapter

target wwpn = World wide port name of the target

target port id = Port ID of the target



The <0 | ON> option flashes the LED until interrupted. 

The <1 | PRESET> option flashes the LED 12 times.



This feature is supported only on JBOD (“just a bunch of disks”) devices.