Q-Logic 8100 Manuel D’Utilisation
6–iSCSI Noninteractive Commands
-dp
SN0054667-00 C
6-7
FW attribute
FW version 2
FW attribute 2
-dp
Use the -dp command to preinstall an adapter driver specified from a .zip
or .inf file. This operation may be performed without an adapter installed in the
system.
You can specify the following actions:
p — Preinstall driver package (default)
i — Install driver package
u — Uninstall driver package
g — Get driver package path
You may also specify the following flags:
DRIVER_PACKAGE_FORCE
DRIVER_PACKAGE_LEGACY_MODE
DRIVER_PACKAGE_ONLY_IF_DEVICE_PRESENT
DRIVER_PACKAGE_REPAIR
DRIVER_PACKAGE_SILENT
You may need to reboot the system following this command. For details about the
success or failure of the driver update operation, view the trace log file.
success or failure of the driver update operation, view the trace log file.
-dr
(Display Default Router List [IPv6 only])
The IPv6 default router list includes both the active default router and a short list
of other routers that advertised themselves as capable of acting as a default
router. The active default router always appears first in the list.
of other routers that advertised themselves as capable of acting as a default
router. The active default router always appears first in the list.
To view the default router list, issue the -dr command as follows:
-dr <hba_port_inst>
-dspchap
(Display a CHAP Table)
To view the CHAP table, issue the -dspchap command as follows:
-dspchap <hba_port_inst>
-dtdsp
(Display Discovered Targets)
To view the discovered targets that are not persistent, issue the -dtdsp
command as follows:
-dtdsp <hba_port_inst>