Rocketfish RF-GPS31104 Fascicule

Congratulations on your purchase of the RF-GPS31104 wireless headset. 

This headset represents the state of the art in wireless headset design and 

is designed for reliable and trouble-free performance.  

 •  Wireless headset

•  Charger

Peel off the protective plastic film on the front of the headset, then charge 

the headset before using.

 •  Connect the smaller end of the micro USB cable (included) to the  

  opening on the end of the headset. To connect the cable to a power  

 source, either connect the larger end of the cable to a USB port on  

  your computer, or to the included wall adapter, which you then plug  

  into a wall outlet. If you charge with your computer, make sure the  

 computer is powered on. While the battery is charging, the indicator  

 lights red. When the battery is fully charged, the indicator lights  

  yellow-green.

Note: Charge the headset with attached USB cable and provided wall

            charger only.

RF-GPS31104

  1  To turn on the headset, press and hold the power button for about 

  two seconds. The headset beeps and the indicator blinks yellow-green. 

  2  To turn off the headset, press and hold the power button for about 

  four seconds. The headset beeps and the indicator briefly lights red.

Your new Rocketfish Bluetooth wireless headset needs to be paired to your PS3

Turn your PS3 off on the back for about 10 seconds and then back on.

Power on your PS3 console with the touch power button on the front of

the PS3.

Find the Settings menu and press X on Accessory Settings. 

Press X on the icon labeled: Register Bluetooth® Device.

Scroll down and press X on the icon labeled Manage Bluetooth Devices.

Select Yes to register a new device (if this is the first time registering a

Bluetooth device) then press X on Start Scanning.

Now prepare your Rocketfish Bluetooth wireless headset to be paired with

the PS3 by holding down the Power/Send/End button (the entire top

area) on the Rocketfish Bluetooth wireless headset for about 8 seconds.

The LED on the device will start flashing a continuous green. 

Once scan is complete, the PS3 will recognize all Bluetooth devices within

Power/Send/End button

Indicator light

Charger connector

Volume down

Volume up

Earpiece

Ear loop