Leica 1000Z01 Manuel D’Utilisation
© Leica
TPS-System 1000 Programs-2.3.1en
205
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
COGO
Introduction
This manual describes the "COGO" program of the
TPS SYSTEM 1000 theodolite series.
The following provides a general overview of the
individual COGO functions.
TPS SYSTEM 1000 theodolite series.
The following provides a general overview of the
individual COGO functions.
The "Inverse" routine computes the direction and
distance between two points.
distance between two points.
The "Traverse" routine computes a new coordinate
point given a direction and distance from a known point
(Polar plotting).
point given a direction and distance from a known point
(Polar plotting).
The "Intersections" routine computes:
• Bearing-Bearing intersections,
• Bearing-Distance intersections or
• Distance-Distance intersections.
• Bearing-Bearing intersections,
• Bearing-Distance intersections or
• Distance-Distance intersections.
The function "Offsets" consists of the following
subfunctions:
• "Distance point straight line"
subfunctions:
• "Distance point straight line"
Calculates the difference in length/abscissa and the
lateral deviation/ordinate with reference to a basis
line emanating from a known point.
lateral deviation/ordinate with reference to a basis
line emanating from a known point.
• "Orthogonal point calculation"
A new point can be calculated which emanates from
a basis line using the difference in length/abscissa
and the lateral deviation/ordinate.
a basis line using the difference in length/abscissa
and the lateral deviation/ordinate.
The "Point Arc" routine computes a radius point given
any three points.
any three points.