Toshiba 40TL900A Manuel D’Utilisation

SETTING UP YOUR TV

24

Move — Press the GREEN button to activate 
the Move feature. Press the 

B or b buttons 

to select the channel you wish to move and 
press OK to check.

If you wish to move multiple channels at 
once, select another channel and check in 
the same way. Repeat as necessary.

Once all desired channels have been checked, 
press the 

B or b buttons to place the focus at 

the position to which you wish to move the 
channels. The channels will be inserted above 
the highlighted channel. Press the GREEN 
button to execute the move.

Position No. Sort — Press the YELLOW 
button. A confi rmation window will appear. 
Press 

C or c to select Yes and press OK.

If the Standby Channel Update is set to On, 

a

 Select 

DTV Settings from the System 

Setup menu and press OK.

b

 Press 

b to select Standby Channel Update 

and press 

C or c to select On.

You can select either Home or Store mode. Home 

is recommended for normal home use. Select Store 

a

 

Select Location from the System Setup menu.

b

 Press 

C or c to select Home or Store.

This is a digital television which is integrated 
to allow the use of both digital and analogue 
services. However, during the lifetime of this set it is 
very likely that analogue services will be switched 
off  to allow for more new digital services.

This ‘switch-off ’ will happen in a number of phases, 
which will be advertised in your area well in 
advance. It is recommended that at each phase 
the television is re-tuned to ensure that existing 
and new digital services can be viewed without 
disruption.