Go-Go Babyz UA105 Manuel D’Utilisation
CARE & MAINTENANCE
20
After the fi rst hour of use, the stroller should be checked to ensure
that it was assembled correctly and that all parts and fasteners are
secure. Make sure the front wheel is tight on the fork, the 2 safety
pins on both sides of the front wheel are properly installed in matching
holes of the stroller frame, and the lever is closed tightly. Pull
horizontally on the rear wheels to ensure the locking mechanism is in
place. Check that rear axle is secure. Check that the parent tray and
child tray are secure.
that it was assembled correctly and that all parts and fasteners are
secure. Make sure the front wheel is tight on the fork, the 2 safety
pins on both sides of the front wheel are properly installed in matching
holes of the stroller frame, and the lever is closed tightly. Pull
horizontally on the rear wheels to ensure the locking mechanism is in
place. Check that rear axle is secure. Check that the parent tray and
child tray are secure.
Periodically check for warn parts, loose screws, torn materials,
or loose stitching.
or loose stitching.
Replace any damaged parts immediately.
Clean metal parts with a damp cloth and wipe dry.
Brush off loose dirt after each use.
Clean vinyl with mild soap and water solution then air dry.
Remove seat cushion to wash on gently cycle.
When using dryer, make sure the setting is set to delicate.
Do not store unit outside exposed to rain or extreme sunlight.
Do not place heavy items on top of stroller when storing it.
Care &
Maintenance
Maintenance