GTO GP-SW050 Manuel D’Utilisation

ImPORtant Safety InStRUctIOnS for the System Designer

 

    

2.  This operator is intended for use only on vehicular gates. Pedestrians must be supplied with a separate

walk-through gate (see Entrapment Protection on page 5).

    

3.  When designing a system that will be entered from a highway or main thoroughfare, make sure the  

 

system is placed far enough from the road to prevent traffic congestion. 

Because automatic gate operators produce high levels of force, all system designers, installers, and consumers 

have an obligation to know the potential hazards associated with improperly designed, installed, or maintained

gate operator systems. Keep in mind that the gate operator is just one component of the total gate operating system.  

Each component must work in unison to provide the consumer with convenience, security, and safety.

This manual contains various safety precautions and warnings for the system designer, installer, and consumer.

Because there are many possible applications of the gate operator, the safety precautions and warnings contained

in this manual cannot be completely exhaustive in nature. They do, however, provide an overview of the safe

design, installation, and use of this product. CAREFULLY READ AND FOLLOW ALL SAFETY PRECAUTIONS, 

The  precautions  and  warnings  in  this  manual  are  identified  with  these 

warning symbols.

This 

symbol identifies the conditions that can result in serious injury or death from electrical shock.

This 

symbol identifies the conditions that can result in damage to the operator or its components, serious 

injury, or death.