GTO GP-SW050 Manuel D’Utilisation

for the Consumer/End User

 

 
 

2.  Distribute  and  discuss  copies  of  the  IMPORTANT  SAFETY  INSTRUCTIONS  manual  with  all  persons

authorized to use your gate.  SAVE THESE INSTRUCTIONS.

 
 

3.  Always keep people and objects away from the gate and its area of travel.

 
 

4.   Your automatic gate is not for pedestrian use. If pedestrian traffic is expected near the gate, a walk-

through gate must be installed for this purpose (see page 5).

 
 

5.   Do not allow children or pets near your gate. Never let children operate or play with gate controls. 

Keep the remote controls away from children and unauthorized users; store controls where children and

unauthorized users do not have access to them.

 

6.  If push buttons or key switches are installed, they should be within sight of the gate, yet located far enough

from the gate (at least 10 feet) so the gate cannot be touched while in operation. Do not operate any

control without watching the movement of the gate.

 

7.  Do not activate your gate operator unless you can see it and can determine that its area of travel is clear

of people, pets, or other obstructions.

 

8.  It is your responsibility to make sure that the installer posted warning signs on both sides of your gate. If

any of these signs or warning decals become damaged, illegible or missing, replace them immediately.

Contact your installer or GTO for replacements.

 

9.  Verify that electric safety edge sensors or photoelectric sensors have been installed (see page 5).  These 

safety devices should be tested monthly. 

 

10.  KEEP GATES PROPERLY MAINTAINED. Have a qualified service person make repairs to the gate hardware.  

 

11.   DANGER: HIGH VOLTAGE! Contact with gate operator circuitry can cause serious injury or death!  DO 

NOT attempt to service this operator yourself; for service, contact your installer or another experienced

technician.

 

12.  Have your gate operator tested monthly and serviced regularly by an experienced technician. The gate

MUST stop and reverse on contact with an obstruction or when an object activates the non-contact

sensors. If these functions are observed to operate improperly, discontinue use and have operator serviced

immediately.