GTO 12 Manuel D’Utilisation

This equipment is similar to other gate or door equipment and meets or exceeds 

Underwriters Laboratory Standard 325 (UL 325). However, gate equipment has 

hazards associated with its use and therefore by installing this product the installer 

and user accept full responsibility for following and noting the installation and 

safety instructions. Failure to follow installation and safety instructions can result 

in hazards developing due to improper assembly. You agree to properly install this 

product and that if you fail to do so Gates That Open, LLC, (“GTO”) shall in no event 

be liable for direct, indirect, incidental, special or consequential damages or loss of 

profits whether based in contract tort or any other legal theory during the course 

of the warranty or at any time thereafter. The installer and/or user agree to assume 

responsibility for all liability and use of this product releasing Gates That Open, LLC, 

from any and all liability. If you are not in agreement with this disclaimer or do not 

feel capable of properly following all installation and safety instructions you may 

return this product for full replacement value.
READ ALL INSTRUCTIONS CAREFULLY AND COMPLETELY before attempting to 

install and use this automatic gate operator. This gate operator produces a high level 

of force. Stay clear of the unit while it is operating and exercise caution at all times.
All automatic gate operators are intended for use on vehicular gates only.

This product meets and exceeds the requirements of UL 325, the standard which 

regulates gate operator safety, as established and made effective March 1, 2000, by 

Underwriters Laboratories Inc.

For more information on the GTO/ACCESS SYSTEMS full line of automatic gate 

operators and access controls visit our website at www.gtoaccess.com.

©2011 Gates That Open, LLC 

Printed in China for Gates That Open, LLC. 

R4854 01.10.12

, LLC

®