DELL 740N Manuel D’Utilisation

*Env-B rupt err

*Env-C rupt err

*FP button stuck

*FLPY init fail

*FLPY reg error

7 #

If the hardware passes all POST tests, the filer begins to load the filer software and 
display informational boot messages.

Figure 3-7 shows a sample message that appears on the system console when the 
filer is successfully started. The exact boot messages that appear on your system 
console depend on your system configuration.

If you are starting the system from a system boot diskette, some messages might be 
different from the following messages. Refer to the Dell PowerVault 720N, 740N, and 
760N System Administrator and Command Reference Guide for information about 
how the filer is started from a system boot diskette.

. :

NetApp Release 5.3: Fri Apr 23 14:57: 51 CDST 1999

System ID: 0016788685 ()
slot 0: System Board

 

Memory Size:        512 MB

slot 0: Fibre Channel adapter

 Version 

1.12

 

Host Loop Id 119

 

Cacheline size 8        FC Packet size 2048

 

3 Disks:             25.8GB

 

1 shelf with DISK ENCLOSURE

 

SCSI Host Adapter 0b

slot 0: Ethernet Controller e0

 

MAC Address: 00:a0:98:00:3b:71 (auto-100tx-fd-

up)
slot 3: Ethernet Controller e3

 

MAC Address:        00:a0:92:f7:62:56 (tp-down)

slot 9: NVRAM

 

Memory Size:        32 MB

Please enter the new hostname [ ]: