Tote Vision LCD-1047VT Manuel D’Utilisation

Before calling for repair service...

■ Before calling for repair service, check the following items for possible remedies to the
encountered symptoms.

Problem

Check below

There is no
picture or sound
(TV,Video,PC).

• Make sure the AC adapter is properly inserted in the
power outlet.
• Make sure the main power button of the main unit is on.
• Make sure the signal cables are securely connected.
• Make sure the power of an external input device is on.
• Make sure the input mode is set to proper mode.
• Fluorescent lamp may have reached the end of service life.

There is no
sound (TV,Video
PC).

• Make sure the volume is not set to minimum.
• Make sure the sound is not set to mute.
• Make sure the sound cables are securely connected.

There is no
picture or sound,
just noise(TV).

• Make sure the antenna cable is properly connected.
• Bad reception can be considered.

Reference

Pages

9
8
-
9
19

Picture is not
clear (TV).

• Make sure the antenna cable is properly connected.
• Bad reception can be considered.

Picture is not
clear (PC).

• Operate the Auto Adjust.
• Reset the Frequency and the Phase.

The picture is not
sharp (TV).

• The reception may be weak.
• The state of broadcast may also be bad.
• Make sure the antenna cable is securely connected.

The picture is not
clear (Video).

• Check whether the Video Type is set up in the Video Setup
menu.

The picture is
doubled or tripled
(TV).

• Make sure the antenna is facing the right direction.
• There may be reflected electric waves from mountains
or buildings.

There are stripes
on the screen or
color fade.

• Check this unit receiving interference from other devices.
  Transmission antennas of radio broadcasting stations and
  transmission antennas of amateur radios and cellular
phones may also cause interference.
• Use the unit as far apart as possible from devices that may
  cause possible interference.

9
9
8

8
-

13
13

12,14