Epson 72 Manuel D’Utilisation

Page de 69
46
Caring for Your Epson MovieMate
Cleaning the Case
Before you clean the case, turn off MovieMate and unplug the power cord.
To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth.
To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral 
detergent. Wring the cloth as dry as possible, then wipe the case.
Caution: Never use wax, alcohol, benzene, thinner, or other chemical detergents. These can 
damage the case. Never spray cleaners directly on MovieMate.
Cleaning and Replacing the Air Filter
Clean the air filter and air intake vent when dust builds up or when you see the following 
message:
The projector is overheating. Make sure nothing is blocking the air vents, and 
clean or replace the air filter. 
Dust clogs prevent proper ventilation, which can cause overheating and damage MovieMate.
1. Press the 
 button to turn MovieMate off and disconnect the power cable.
2. Use a small vacuum cleaner designed for computers and other office equipment to clean 
the filter, as shown.
If you cannot clean the removable filter or it is broken, you need to replace it. 
You can purchase a new filter (part V13H134A15) from an Epson authorized reseller. To 
find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase 
online at 
 (U.S. sales) or 
 (Canadian sales).