Epson 72 Manuel D’Utilisation

Caring for Your Epson MovieMate

Follow these guidelines when storing MovieMate:

■

Make sure the temperature and humidity of the storage area are within the recommended 
range for the projector: 14 to 140 °F (–10 to 60 °C) and 10 to 90% relative humidity 
without condensation.

■

Make sure all discs are ejected.

■

Close the lens cover and retract the feet.

■

Remove the batteries from the remote control.

■

Package MovieMate in its original packaging or equivalent (as described in the following 
section).

Note: Epson shall not be liable for any damages incurred during transportation.

MovieMate contains many glass and precision parts. If you need to transport it, follow these 
guidelines to prevent damage:

■

When shipping MovieMate for repairs, use the original packaging material if possible. If 
you do not have the original packaging, use equivalent materials, placing plenty of 
cushioning around MovieMate. Be sure the carrier is capable of transporting fragile 
equipment and is aware that MovieMate is fragile. 

■

If you move MovieMate from a cold environment into a warm room, condensation 
(moisture) may form internally or on the lens surface. To avoid damage that might be 
caused by condensation, wait approximately an hour before using MovieMate. If 
condensation forms, turn off the power, then wait an hour or two before use.

■

When you are hand-carrying MovieMate, make sure all discs are ejected, the lens cover is 
closed, and the feet are retracted. 

■

Lift MovieMate as shown below. Make sure the top 
section is locked in place. Be careful not to open the 
interface cover while you are carrying MovieMate.