Epson 72 Manuel D’Utilisation

Problem Solving

■

Make sure the equipment is turned on.

■

Press the 

 button on MovieMate or on the remote control.

■

Press the 

 or 

Play

 button on the external equipment.

■

Make sure you don’t have cables connected to more than one video port. You can only 
use one connection at a time (see page 23).

 No Signal

■

Make sure the equipment is turned on.

■

Make sure your cable(s) are connected correctly (see page 23).

■

Press the 

 button on MovieMate or the remote control to select the external video 

source. Allow a few seconds for MovieMate to sync up.

Signal not supported.

Press the 

 button on the remote control and check the 

Video Signal

 setting (see 

Press the 

 button on the remote control and select the appropriate aspect ratio.

■

If you’re using an extension cable, electrical interference may affect the signal.

■

Check the solutions on pages 55 and 56.

■

Press the 

 button on the remote control and check the 

Video Signal

 setting (see 

■

Press the 

 button on the remote control to select the best setting for your viewing 

environment.

■

Adjust the 

Color Saturation

 or 

Tint

 settings. See page 41.