Eddie Bauer 22-750 Manuel D’Utilisation

Place the child’s bottom
and back flat against the
child restraint.This will
increase comfort and allow
the harness to properly
tighten.

Rear-Facing Position:
Harness guide must be

even with or just below

the shoulders.

If the harness guide is
above the child’s shoulders
with the headrest in the
lowest position,

do not

use this child restraint.
Use an infant child
restraint instead.

Harness
Guide

Forward-Facing Position: Harness guide must be

even with or just above

the shoulders.

If the harness guide is below the child’s shoulders with
the headrest in the 4th highest position, the child
weighs at least 40 lbs. (18.1 kg) and is over 1 year old,
convert the seat to a belt-positioning booster.

Check Harness/Headrest Height

WARNING:

Make sure

metal bar

is locked

into

position. Failure to
do this can result in
serious injury or
death.

Squeeze the metal bar on
the back of the seat. Move
harness/headrest adjuster
up or down to the position
that correctly fits your child.
Release bar into slot to
lock.

NOTE:

The highest

position is for belt-
positioning use only.

Infant Insert (on select
models): When using
insert

(A)

, make sure insert

does not cover your infant’s
face in any way. Remove the
insert for older babies and
toddlers.To remove the
insert, unthread the harness
from splitter plate (see Belt-
Positioning Booster
section), remove harness
guides (see “Removing Seat

Pad for Cleaning” section), remove insert. Replace harness
guides, rethread harness and reattach to splitter plate.

Harness Covers (on select models): Harness covers

(B)

help provide comfort to the neck. For harness covers

to fit correctly, you may have to fit the upper ends of the
covers through the harness slots.To remove, unthread
harness from splitter plate. Slide covers off and reattach
harness.

4358-3410D Alpha 5pt 1/26/06 11:39 AM Page 15