Joovy 12 Manuel D’Utilisation

•  The doll booster should be placed in the center position of the seat directly  
  behind the front seats whenever possible.  This is the same location that a  
  real booster would be placed.
•  The vehicle seat should always be a forward facing seat and the seat should  
  lock in an upright position.

 

• 

NEVER use this toy to carry a baby or child for any purpose whatsoever.

• 

DO NOT use the booster to carry any dolls or stuffed toys that weigh more than 
7 pounds.

•  As with a real booster, this toy booster should never be placed near the edges 

of counter tops, tables, or other elevated surfaces.

•  Bring the seat belt around the doll’s waist and insert the male end of each waist 

strap  buckle  into  the  female  buckle.    Insure  that  they  snap  into  place.    See 
Figure 3.  Tighten the waist belt to be snug around the doll’s waist.

•  Buckle the harness clip pieces together.  See Figure 4. 
  Position  the harness clip in the middle of the doll or stuffed toys’ 

chest, level with the armpits and away from the neck.

•  Both  the  shoulder  straps  and  the  waist  straps  may  be  adjusted  using 

the  sliding  buckle  on  these  straps,  located  on  the  back  of  the  booster.   
See Figure 5.