Motorola PM1200 Manuel D’Utilisation
PM1200™ Mobile Radio
with Control Head
with Control Head
Quick Reference Card
Product Safety and RF Exposure Compliance
ATTENTION!
This radio is restricted to occupational use only to satisfy
FCC RF energy exposure requirements. Before using this
product, read the RF energy awareness information and
operating instructions on page ii .
FCC RF energy exposure requirements. Before using this
product, read the RF energy awareness information and
operating instructions on page ii .
BASIC OPERATION
Turning the Radio On and Off
Selecting Channel and Group
Monitoring Conventional Modes
Cancelling Monitoring
Receiving
Transmitting (Conventional Modes)
LED INDICATIONS
STATUS ANNUNCIATORS
Before using this product, read the operating instructions
for safe usage contained in the Product Safety and RF
Exposure booklet enclosed with your radio.
!
C a u t i o n
Power
Button
Button
LCD
Display
Display
Channel
Group Keys
Group Keys
Volume
Selector
Knob
Selector
Knob
Emergency
Microphone
Microphone
Channel
Selector
Knob
Selector
Knob
PF Buttons
Push the Power Button to turn it on.
When the radio is powered on, the display shows the
name of the channel.
You will hear a high-pitched (good power-up)
tone.
If your radio shows an error on power-up, contact your
system manager for assistance.
When the radio is powered on, the display shows the
name of the channel.
You will hear a high-pitched (good power-up)
tone.
If your radio shows an error on power-up, contact your
system manager for assistance.
1 Press the Channel Group Keys to select the desired
Channel Group.
2 Turn the Channel Selector Knob to select the
desired channel.
Press the preprogrammed Monitor PF Button.
The display will show "MON"
Press the preprogrammed Monitor PF Button.
1 Select the desired group and channel.
2 Turn the Volume Selector Knob to adjust the
2 Turn the Volume Selector Knob to adjust the
volume.
1 Select the desired group and channel.
2 Turn the Volume Selector Knob to adjust the
2 Turn the Volume Selector Knob to adjust the
volume.
3 When a mode becomes available, press and hold the
PTT button to transmit; release the PTT button to
receive.
receive.
Action
LED Condition
Meaning
Press the PTT
button to
transmit
button to
transmit
Steady Red
Normal
transmission
transmission
Receiving signal
with TPL/DPL
enabled
with TPL/DPL
enabled
Solid Green
Call received
Receiving signal
with TPL/DPL
disabled
with TPL/DPL
disabled
Solid Green
Call received
Scan landed on
Rx Channel with
TPL/DPL
enabled
Rx Channel with
TPL/DPL
enabled
Solid Green
Call received
Scan landed on
Rx Channel with
TPL/DPL
disabled
Rx Channel with
TPL/DPL
disabled
Solid Green
Call received
Turn at the
Volume Selector
knob or Channel
selector knob
Volume Selector
knob or Channel
selector knob
Blinking Orange
Incorrect preset
position of the
Volume Selector
Knob & Channel
Selector Knob
position of the
Volume Selector
Knob & Channel
Selector Knob
Annunciator
Indication
Quiet Monitor
All active traffic on the selected
channel in being monitored without
noise.
Noise Monitor
All active traffic on the selected
channel in being monitored with
noise.
Scan List Channel
The current selected channel is in
the scan list.
Quiet Monitor
All active traffic on the selected
channel in being monitored without
noise.
Noise Monitor
All active traffic on the selected
channel in being monitored with
noise.
Scan List Channel
The current selected channel is in
the scan list.
(blinking)
PM1200.book Page 46 Wednesday, October 10, 2007 2:44 PM