Sony SEP-30BT Manuel D’Utilisation
SEP-30BT 3-870-834-11(1)
SEP-30BT 3-870-834-11(1)
Hold the Play button of the player down for more than 7 seconds.
While the player is processing the pairing, the Bluetooth indicator flashes rapidly in
blue.
Note
The pairing process lasts about 5 minutes. If the process is interrupted before you complete
operations up to step 4, perform operations from step 2 again.
Perform the pairing operation on the Bluetooth device to be paired, and
search for the player.
For details about the pairing operation, refer to the operation manual supplied with
the Bluetooth device to be paired.
If the Bluetooth device to be paired has a display, perform the following steps:
If the Bluetooth device to be paired has a display, perform the following steps:
When a list of the devices found appears, select “SEP-30BT.” If “SEP-30BT” is not
displayed, perform operations from step 1 again.
When a passcode* is required, enter “0000” (zero-zero-zero-zero).
“Passcode” may be called “Passkey,” “PIN code,” “PIN number,” or “Password,” etc.,
depending on the device.
When pairing is successful, the Bluetooth indicator of the player will flash slowly.
Note
When pairing is unsuccessful, the Bluetooth indicator does not flash slowly. If the Bluetooth
indicator flashes rapidly in blue, perform step 4 again. If the Bluetooth indicator lights up
and remains lit, perform operations from step 2 again.
Interrupting the pairing operation
Hold the Play button down for about 2 seconds.
*
List
ening t
ening t
o Music via Bluet
ooth
Communic
ation
Pairing is an operation where Bluetooth devices register with each other.
Once you pair the player with a Bluetooth device, you do not need to repeat the pairing
operation with the Bluetooth device again, except for the following occasions:
The pairing information is erased from the player, due to, for example, repair.
You pair the player with a 9th Bluetooth device. The player can be paired with up to
8 Bluetooth devices. If you pair the player with another Bluetooth device, the pairing
information of the Bluetooth device that has not been connected for the longest time
among the 8 Bluetooth devices will be replaced by the pairing information of the new
Bluetooth device.
The connection information for the player was deleted from the connected Bluetooth
device.
When you initialize or format the player using Rolly Choreographer, pairing information
with all Bluetooth devices will be erased.
1
Place the Bluetooth device to be paired within 1 m (3 feet) of the player.
Set the Power switch of the player to .
An operation sound sounds, and the Bluetooth indicator (
page 9) lights up in blue.
Pairing the Player with a Bluetooth Device
Bluetooth indicator
Power switch
Play button