Lightolier C6DA120 Fascicule

12 1/4" Dia.

included)

(mounting bars

Adjustment

13 3/4" to 24"

*11 1/8" min. is for 
up to 3/4" thick ceiling.

1 1/4" Max. Ceiling Thk.

11 5/8" max.

11 1/8" min.*

9 1/8"

15 3/8" 

10 3/8" 

Open

Open

Adjustable

Open

Lensed

Downlight

Downlight

Accent

Wall Washer/Downlight

Wall Washer

100W BT15, MB19

250W PAR38

120W PAR38

100W BT15, MB19

120W PAR38

150W A21

200W A21

Calculite

®

Evolution Recessed Downlighting

Page 1 of 1

6" Aperture Incandescent 120V Non-IC AirSeal

®

Frame-In Kit

Job Information

Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

a Genlyte Thomas Company

www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902

1. Housing: Steel, 0.03" (22 ga.). Top Cover: Aluminum, 0.04" (14 ga.). Matte

black finish. AirSeal

®

housing minimizes air leakage to less than 2CFM at

1.57 PSF (or 75pa).

2. Mounting Frame: Die-cast aluminum for dry or plaster ceilings. Locks into

position along length of mounting bars with locking screws.

3. Retaining Springs: Precision-tooled steel springs secure reflector trim to

mounting frame for quick, tool-less installation.

4. Mounting Bars: Galvanized steel, 0.06" (16 ga.). Bars pivot for easy instal-

lation and wire-in below ceiling line. Bars extend to accommodate 16" to 24"
O.C. joist spacing. Bars can accommodate 12" O.C. joist spacing after a slight
field modification (see instruction sheet). Integral self-tapping screws secure
to wood or metal construction. Built-in tabs for locking to T-bars without the
need of accessories. 

5. Snap-In Connectors: Keyed to accept power and socket harnesses which

are provided with reflector trim.

6. Junction Box: Galvanized steel .063" (14 ga.). UL listed for maximum of 8

No. 12 AWG 90°C through branch circuit conductors. Accessible from inside
and outside of fixture. Outside J-Box door is hinged for maximum opening.
Snap-in plug is provided on inside cover for quick connection to power har-
ness.

7. Thermal Protector: Meets NEC and UL requirements. Insulation must be

kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.

8. Reflector Trim: Compatible reflector trims are listed above. See separate

reflector trim specification sheets for complete catalog numbers and details.

Consult Factory

UL Listed (suitable for damp locations), I.B.E.W.
Air leakage is less than 2cfm at 75pa, tested in accordance with ASTM E283.