Lightolier Baselyte-BSL26 Manuel D’Utilisation
Lighting Systems
Baselyte-BSL26
Page of 8
2 Light T5 HO Indirect
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Notes:
Lightolier
a Genlyte Company
www.lightolier.com
63 Airport Road, Fall River, MA 02720 • (508) 679-83 • Fax (508) 674-470
We reserve the right to change details of design, materials and finish.
© 2005 Genlyte Group LLC • 0205 Rev.
Ordering Information
Family
H = T5 HO
3 = Indirect
02
EN
H
3
BSL
02 = 2 Light
EN = Solid
04 = 4’
08 = 8’
12 = 2’
08 = 8’
12 = 2’
C = Custom Color
W = Standard
W = Standard
White
Distribution
Lamp Type
No. of Lamps
Housing
Module Length
Wiring
Voltage
Ballast
Finish
Weight = 3.0 lb./ft
1 = cct.
2 = 2cct.
3 = cct. w/EC/NL
4 = 2cct. w/EC/NL
5 = cct. w/EM Battery
6 = 2cct. w/EM Battery
7 = cct. w/Dimming
8 = cct. w/cct.
2 = 2cct.
3 = cct. w/EC/NL
4 = 2cct. w/EC/NL
5 = cct. w/EM Battery
6 = 2cct. w/EM Battery
7 = cct. w/Dimming
8 = cct. w/cct.
Thru wire
9 = 2cct. w/cct.
Thru wire
E = Standard
<0% THD
F = Standard
<0% THD
w/fusing
w/fusing
Note: Please consult
wiring section of spec
sheets for more
wiring options.
wiring section of spec
sheets for more
wiring options.
Specifications
Features
. Housing: die-formed 20ga. cold rolled steel
2. End Set: die-cast metal with baked powder coat finish
3. Lamping: two T5 HO lamps
4. Configuration: 4’, 8’ and 2’ module lengths or continuous rows
5. Ballasts: electronic 20V or 277V
. Housing: die-formed 20ga. cold rolled steel
2. End Set: die-cast metal with baked powder coat finish
3. Lamping: two T5 HO lamps
4. Configuration: 4’, 8’ and 2’ module lengths or continuous rows
5. Ballasts: electronic 20V or 277V
Finish
High-quality white powder coat with textured matte finish.
Custom colors available. Consult factory.
High-quality white powder coat with textured matte finish.
Custom colors available. Consult factory.
Mounting
Aircraft cable gripper is tamper-resistant and provides infinite vertical
adjustment capability. Aircraft cable, crimp and cable gripper independently
tested to meet stringent safety requirements.
Aircraft cable gripper is tamper-resistant and provides infinite vertical
adjustment capability. Aircraft cable, crimp and cable gripper independently
tested to meet stringent safety requirements.
Electrical
All luminaires are factory pre-wired to module ends with quick-wire
connectors.
All luminaires are factory pre-wired to module ends with quick-wire
connectors.
Joints & Intersections
Self-aligning joining system with hands-free pre-joining wire access.
Self-aligning joining system with hands-free pre-joining wire access.
Labels
UL, CSA standards.
UL, CSA standards.
Individual Fixtures
. Determine the number of individual modules required
2. Order one end set per module
3. Order one non-power mount per module
4. Order one power mount per module
. Determine the number of individual modules required
2. Order one end set per module
3. Order one non-power mount per module
4. Order one power mount per module
Continuous Rows*
. Determine run length
2. Order the appropriate number and length of modules for complete run
3. Order one end set for each run
4. Order one non-power mount for each module
5. Order one power mount per run
6. Order one joiner per module minus one (e.g. 3 modules requires 2 joiners)
. Determine run length
2. Order the appropriate number and length of modules for complete run
3. Order one end set for each run
4. Order one non-power mount for each module
5. Order one power mount per run
6. Order one joiner per module minus one (e.g. 3 modules requires 2 joiners)
*Note: Some runs may require additional power mounts. Please see the
‘Run Configuration’ table on the next page for more details.
‘Run Configuration’ table on the next page for more details.
Ordering Instructions
D = Dual 20V
& 277V
1 = 20V
2 = 277V
2 = 277V
Note: Option‘D’ is
standard. Voltage
options and 2 are
only available with
EM Battery and
Dimming wiring
options.
standard. Voltage
options and 2 are
only available with
EM Battery and
Dimming wiring
options.