Honeywell MS-9600LSC Manuel D’Utilisation

94

MS-9600LS Series Manual — P/N 52646:B2  2/12/2010

Programming

The Description selection allows the programmer to enter additional information about the control 
module currently being programmed.  This information will be displayed as part of the device label 
on the display.  Pressing 2 while viewing Edit Control Screen #4 will cause the following screen to 
be displayed: 

A flashing cursor will appear at the first asterisk to the left.  The programmer can enter additional 
descriptive information about the device being programmed.  This information will appear on the 
display along with the standard device label information.  

A maximum of 20 characters (including spaces) can be entered.  To enter alphanumeric characters 
from the keypad, repeatedly press the appropriate key until the desired character is displayed in the 
first position.  For example, to enter the letter B, press the 2 (ABC) key three times to toggle 
through the characters 1, A, and B.  Press the right arrow key to move the cursor one position to the 
right and repeat the process to enter the next character.  To enter a space, press the * (QZ) key four 
times until a blank appears in the desired position.  When all characters have been entered, press the 
Enter key to store the information.  The display will return to the Edit Control Screen #4, displaying 
the new information at the bottom of the screen.

In addition, the user may use the Recall/Increment function at any time when the cursor is on the 
first letter of the Adjective or Noun field as follows:

•

If the zero key is pressed, a 0 is placed in the first letter position.

•

If the zero key is then pressed a second time with no intervening key actions, the entire 
Adjective field is replaced with the field entered for the previous device programmed, and the 
cursor moves to the last character of the field (Recall function).  The Recalled Adjective or 
Noun field may now be changed letter-by-letter.

•

If the zero key is pressed again with no other intervening key actions and the last character in 
the field is a number 0-9, the number is incremented by one.  If the last character is a letter, it 
changes to a 0.  If the last character is 9 it goes to 0.

•

The above increment function may be repeated with each press of the zero key.

As an example, the user could quickly enter ‘FLR_3_ROOM 305’ as follows:

1. The cursor is on the first letter of the Adjective field.  Press the zero key twice to display 

2. With the cursor on the first letter of the Noun field, press the zero key twice to recall the 

display ROOM_304.  The cursor automatically jumps from the first to the last letter of the 
Noun field.

3. With the cursor on the last letter of the Noun field, press the zero key again to increment the 

room number to 305.

4. Press the right arrow key to advance the zone field.
5. Select a zone number from 00 to 99.  Z00 (default zone) is the general alarm zone.  Z01 

through Z99 may be selected to link software zones.

EDIT CONTROL

1=ADJECTIVE/NOUN

2=DESCRIPTION

Edit Control Screen #4

DESCRIPTION    1M002

NOUN/ADJECTIVE

********************