Cirkuit Planet ICA-108W Manuel D’Utilisation
3.5 Network
Use this menu to configure the network to connect the device and the clients.
3.5.1 Network
This section provides the menu of connecting the device through Ethernet cable.
MAC address:
Display the Ethernet MAC address of the device. Note that user
cannot change it.
cannot change it.
Obtain an IP
address
automatically
(DHCP):
address
automatically
(DHCP):
DHCP: Stands for Dynamic Host Configuration Protocol. Enable this
checked box when a DHCP server is installed on the network to issue
IP address assignment. With this setting, the IP address is assigned
automatically. If this device cannot get an IP address within limited
tries, the device will assign a default IP address, 192.168.0.20, by
itself as the default IP address.
checked box when a DHCP server is installed on the network to issue
IP address assignment. With this setting, the IP address is assigned
automatically. If this device cannot get an IP address within limited
tries, the device will assign a default IP address, 192.168.0.20, by
itself as the default IP address.
IP address,
Subnet mask,
Gateway, 1st DNS,
2nd DNS server:
Subnet mask,
Gateway, 1st DNS,
2nd DNS server:
If you do not select Obtain an IP address automatically, then you need
to enter these network parameters by yourself.
to enter these network parameters by yourself.
IP Address:
This address is a unique numbers that identifies a computer or device
on the WAN or LAN. These numbers are usually shown in groups
separated by periods, for example: 192.168.0.200
on the WAN or LAN. These numbers are usually shown in groups
separated by periods, for example: 192.168.0.200
34