Epson 400 Series Manuel D’Utilisation

Making Detailed Adjustments

You can clear all your memory settings at once.

1. Press the 

Menu

 button on the remote control.

2. Open the 

Memory 

menu, then select 

Reset Memory

.

3. Press the 

Select 

button to delete the memory settings.

If the image quality isn’t what you expect, one or more settings may be adjusted improperly. 
If necessary, you can restore the projector to its factory-default (original) settings. 

To restore the settings in a specific menu (such as the Image or Settings menu), open that 
menu, select 

Reset

, and confirm as needed. The example below shows how to reset the 

Picture menu settings:

You can also reset the lamp usage timer or restore all the projector settings to their original 
values. Follow these steps:

1. Press the 

Menu

 button on the remote control.

2. Open the 

Reset

 menu.

3. Do one of the following:

■

Select 

Reset Lamp Hours 

to clear the lamp usage timer and reset it to zero 

You should reset the lamp timer only when you install a new projector lamp. See 
page 52 for more information.

■

Select 

Reset All 

to return all projector settings to their original defaults (except Input 

A, Save Memory, and Language).

Open the Picture 
menu . . .

. . . and  select 
Reset

PowerLite Cinema 400.book  Page 42  Friday, July 7, 2006  2:24 PM