Epson 400 Series Manuel D’Utilisation

Making Detailed Adjustments

■ Keystone

Adjusts the shape of the image, if the left and right sides are not parallel after tilting the 
projector up or down at the screen (see page 25).

■ Projection

Inverts the image for overhead projection.

■ Direct Power On

Sets projection to start when the main power switch is turned on, without pressing the 

On

 button on the remote control or the 

Power

 button on the projector. 

Note: When direct power on is enabled, power surges that occur after a power outage can 
cause the projector to turn on.

■ Video Signal

Leave this setting on 

Auto

 so the projector can automatically interpret the format, such as 

NTSC or PAL (for standard TV formats). 

■ Input A

Change this setting to match the type of equipment connected to the Input A port.

For component video, select 

Auto

 to let the projector automatically interpret the signal; 

or select 

YCbCr 

or 

YPbPr

 to manually select your video equipment’s signal. 

■ Trigger Out

Turn on this setting if you want the 

Trigger out

 port to output a 12-volt signal while 

the projector is operating. You can use this to raise or lower your projection screen.

Settings

Æ Keystone

Settings

Æ Projection

Settings

Æ OperationÆ Direct Power On

Settings

Æ Input SignalÆ Video Signal

Settings

Æ Input SignalÆ Input A

Settings

Æ Operation Æ Trigger Out

PowerLite Cinema 400.book  Page 45  Friday, July 7, 2006  2:24 PM