Smeg SC770U Manuel D’Utilisation

TIMER BUTTON

END OF COOKING BUTTON

CLOCK ADJUSTMENT AND RESET

VALUE DECREASE BUTTON

VALUE INCREASE BUTTON

When the oven is used for the first time, or after an interruption in the electrical power supply, the display
flashes at regular intervals.
Press 

 for 1 to 2 seconds to stop the display from flashing and to start the procedure for setting the

correct time. Press the value modification buttons 

 or 

 to increase or decrease the setting by one

minute.
Press one of the two value modification buttons until the current time appears. 6 to 7 seconds after the
last button is pressed, the clock will start at the set time.
When the oven is in standby mode, to modify the time simply press the 

 button for about 2 seconds

and adjust the time using the 

 and 

 buttons. A few seconds after the last button is pressed, the clock

will restart normal operation.
At the end of each programmed operation 8 beeps will sound 3 to 4 times at intervals of about 1 and a
half minutes. The beeps can be hushed at any time by pushing any button.

•  Press 

 and the clock dial display will light up as shown in figure 1;

•  Within 6 to 7 seconds, press the 

 or 

 buttons to set the timer. Each time a

button is pressed, 1 outer mark on the clock dial, representing 1 minute of cooking
time, will light up or go out. (Figure 2 shows a cooking time of 10 minutes).

•  The countdown will start 6 to 7 seconds after the last button is pressed; when the

programmed time has elapsed, the buzzer will sound.

•  During the countdown, the current time can be viewed by pressing the 

 button

once; press it again to return to the timer display.

•  At the end of the countdown, the oven must be turned off manually by turning both

the oven thermostat knob and function selector knob to 0.

•  The maximum cooking time that can be set is 60 minutes.

1)

2)