Dakota Digital LAT-NR150 Manuel D’Utilisation

LAT-NR150

LED Tail Lights for 1970-72 Nova 

 

MAN#650177 

 

 

1.  Remove the tail light lens. 

  

 

2.  Remove the light bulb 
3.  Remove the original bulb connector from the back side of the housing. 

  

  

 

4.  Now is a good time to clean the lens and housing. If lenses are in bad shape a new set is 

recommended. 

5.  Remove the two screws and mounting plate from the side of the new LED assembly. 

 

6.  Insert the new LED assembly into the taillight housing and route wires through the hole where 

the original bulb and connector were located.  Use caution when feeding the wires through to 

 

MAN#650177