Philips MCM2150/05 Manuel D’Utilisation

MCM2150

Philips and the Philips’ Shield Emblem are registered

trademarks of Koninklijke Philips N.V. and are used

by WOOX Innovations Limited under license from

Koninklijke Philips N.V.

MCM2150_05_UM_V2.0

User manual

1 Important

Safety

This ‘bolt of lightning’ indicates uninsulated material within the device may

cause an electrical shock. For the safety of everyone in your household,

please do not remove the covering.

The ‘exclamation mark’ calls attention to features for which you should

read the enclosed literature closely to prevent operating and maintenance

problems.

WARNING: To reduce the risk of fire or electric shock, the device should

not be exposed to rain or moisture and objects filled with liquids, such as

vases, should not be placed on the device.

CAUTION: To prevent electric shock, fully insert the plug. (For regions

with polarized plugs: To prevent electric shock, match wide blade to wide

slot.)

Important Safety Instructions

•

Follow all instructions.

•

Heed all warnings.

•

Do not use this device near water.

•

Clean only with dry cloth.

•

Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions.

•

Do not install near any heat sources such as radiators, heat

registers, stoves, or other devices (including amplifiers) that

produce heat.

•

Protect the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles, and the point where

they exit from the device.

•

Only use attachments/accessories specified by the manufacturer.

•

Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer or sold

with the device. When a cart is used, use caution

when moving the cart/device combination to

avoid injury from tip-over.

•

Unplug this device during lightning storms or

when unused for long periods of time.

•

Refer all servicing to qualified service personnel. Servicing is

required when the device has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the device, the device has been exposed to

rain or moisture, does not operate normally, or has been dropped.

•

Battery usage CAUTION – To prevent battery leakage which may

result in bodily injury, property damage, or damage to the unit:

•

Install all batteries correctly, + and - as marked on the unit.

•

Batteries (packed or installed) shall not be exposed to

excessive heat such as sunshine, fire or the like.

•

Remove batteries when the unit is not used for a long time.

•

The device shall not be exposed to dripping or splashing.

•

Do not place any sources of danger on the device (e.g. liquid filled

objects, lighted candles).

•

Where the MAINS plug or an appliance coupler is used as the

disconnect device, the disconnect device shall remain readily

operable.

Warning

•

Never remove the casing of this device.

•

Never lubricate any part of this device.

•

Never place this device on other electrical equipment.

•

Keep this device away from direct sunlight, naked flames or heat.

•

Never look into the laser beam inside this device.

•

Ensure that you always have easy access to the power cord, plug, or adaptor to

disconnect this device from the power.

Mains fuse

This information applies only to products with a UK mains plug.

This product is fitted with an approved molded plug. If you replace the

fuse, use one with:

•

the ratings shown on the plug,

•

a BS 1362 approval, and

•

the ASTA approval mark.

Contact your dealer if you are not sure about what type of fuse to use.

Caution: To conform with the EMC directive (2004/108/EC), do not

detach the plug from the power cord.

2 Your micro system

Congratulations on your purchase, and welcome to Philips! To fully benefit

from the support that Philips offers, register your product at www.philips.

com/welcome.

Introduction

With this unit, you can:

•

enjoy audio from discs, USB devices, and other external devices;

•

listen to radio stations.

You can enrich sound output with below sound effect:

•

Digital Sound Control (DSC)

The unit supports these media formats:

What’s in the box

Check and identify the contents of your package:

SOURCE

AUDIO IN

VOLUME

AUDIO IN

PRESET/ALBUM

MUTE

SHUFFLE

CLOCK

SLEEP

TIMER

PROG

SOUND

VOL

DISPLAY

REPEAT

SOURCE

AUDIO IN

VOLUME

3 Get started

Caution

•

Use of controls or adjustments or performance of procedures other than herein may

result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence.

If you contact Philips, you will be asked for the model and serial number

of this apparatus. The model number and serial number are on the back

of the apparatus. Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Connect speakers

Note

•

For optimal sound, use the supplied speakers only.

•

Connect only speakers with impedance that is the same or higher than the supplied

speakers. Refer to the Specifications section of this manual.

Connect power

Caution

•

Risk of product damage! Ensure that the power supply voltage corresponds to the

voltage printed on the back or the underside of the unit.

•

Risk of electric shock! When you unplug the AC power cord, always pull the plug from

the socket. Never pull the cord.

•

Before you connect the AC power cord, ensure that you have completed all other

connections.

Demonstrate the features

In the standby mode, you can demonstrate features by pressing .

The features are displayed one by one across the display

panel.

•

To turn off the demonstration, press again.

Prepare the remote control

Caution

•

Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard

batteries in fire.

•

Risk of product damage! When the remote control is not used for long periods,

remove the batteries.

To insert the remote control battery:

Open the battery compartment.

Insert the supplied AAA battery with correct polarity (+/-) as

indicated.

Close the battery compartment.

Set clock

In standby mode, press and hold CLOCK on the remote control

for more than two seconds.

[24H] or [12H] hour format is displayed.

SPEAKER OUT (8Ω)

ANTENNA

100-240 V~50/60 Hz

AC MAINS~

SPEAKER OUT (8Ω)

ANTENNA

100-240 V~50/60 Hz

AC MAINS~

Press

to select [24H] or [12H] hour format, and then

press CLOCK.

The hour digits are displayed and begin to blink.

Press

to set hour, and then press CLOCK.

The minute digits are displayed and begin to blink.

Repeat step 3 to set minute.

Note

•

If no button is pressed in 90 seconds, the system exits clock setting mode automatically.

Tip

•

You can view clock information in power on mode by pressing CLOCK.

Turn on

Press .

The unit switches to the last selected source.

Switch to standby mode

Press again to switch the unit to standby mode.

The clock (if set) is displayed on the panel.

Switch to ECO standby mode:

Press and hold for three seconds.

The display panel is dimmed.

Note

•

The unit switches to Eco Power Standby mode after 15 minutes in standby mode.

Switch between standby mode and ECO standby mode:

Press and hold for more than two seconds.

4 Play

Play from disc

Play from USB

Note

•

Make sure that the USB device contains playable audio content.

Control play

Select a folder.

Select an audio file.

Pause or resume play.

SOURCE

AUDIO IN

VOLUME

AUDIO IN

PRESET/ALBUM

MUTE

CLOCK

SLEEP

TIMER

PROG

SOUND

VOL

SHUFFLE

REPEAT

DISPLAY

SOURCE

AUDIO IN

VOLUME

AUDIO IN

PRESET/ALBUM

MUTE

CLOCK

SLEEP

TIMER

PROG

SOUND

VOL

SHUFFLE

REPEAT

DISPLAY

USB

MCM2150_05_UM_V2.0.indd 1

1/14/2014 2:17:25 PM