Acronis Backup & Recovery 10 Adv WS TIDLBPDES Manuel D’Utilisation
Codes de produits
TIDLBPDES
o
If you set, say, 10 sec for the bootable agent, the agent will launch 10 seconds after the menu
is displayed. This enables unattended onsite operation when booting from a PXE server or
WDS/RIS.
is displayed. This enables unattended onsite operation when booting from a PXE server or
WDS/RIS.
3. [optional] Remote logon settings:
o
user name and password to be entered on the console side at connection to the agent. If you
leave these fields empty, the connection will be enabled on typing any symbols in the prompt
window.
leave these fields empty, the connection will be enabled on typing any symbols in the prompt
window.
4. [optional] Network settings (p. 245):
o
TCP/IP settings to be assigned to the machine network adapters.
5. [optional] Network port (p. 246):
o
the TCP port that the bootable agent listens for incoming connection.
6. The type of media to create. You can:
o
create CD, DVD or other bootable media such as removable USB flash drives if the hardware
BIOS allows for boot from such media
BIOS allows for boot from such media
o
build an ISO image of a bootable disc to burn it later on a blank disc
o
upload the selected components to Acronis PXE Server
o
upload the selected components to a WDS/RIS.
7. [optional] Windows system drivers to be used by Acronis Universal Restore (p. 246). This window
appears only if the Acronis Universal Restore add-on is installed and a media other than PXE or
WDS/RIS is selected.
WDS/RIS is selected.
8. Path to the media ISO file or the name or IP and credentials for PXE or WDS/RIS.
Network settings
While creating Acronis bootable media, you have an option to pre-configure network connections
that will be used by the bootable agent. The following parameters can be pre-configured:
that will be used by the bootable agent. The following parameters can be pre-configured:
•
IP address
•
Subnet mask
•
Gateway
•
DNS server
•
WINS server.
Once the bootable agent starts on a machine, the configuration is applied to the machine’s network
interface card (NIC.) If the settings have not been pre-configured, the agent uses DHCP auto
configuration. You also have the ability to configure the network settings manually when the
bootable agent is running on the machine.
interface card (NIC.) If the settings have not been pre-configured, the agent uses DHCP auto
configuration. You also have the ability to configure the network settings manually when the
bootable agent is running on the machine.
Pre-configuring multiple network connections
You can pre-configure TCP/IP settings for up to ten network interface cards. To ensure that each NIC
will be assigned the appropriate settings, create the media on the server for which the media is
customized. When you select an existing NIC in the wizard window, its settings are selected for saving
on the media. The MAC address of each existing NIC is also saved on the media.
will be assigned the appropriate settings, create the media on the server for which the media is
customized. When you select an existing NIC in the wizard window, its settings are selected for saving
on the media. The MAC address of each existing NIC is also saved on the media.
You can change the settings, except for the MAC address; or configure the settings for a non-existent
NIC, if need be.
NIC, if need be.
Copyright © Acronis, Inc., 2000-2009
245