Avaya IP Office User and Administration CD Set 4.2 700459332 Manuel D’Utilisation
Codes de produits
700459332
Product Description
IP Office 4.2
IP Office 4.2
© 2009 AVAYA All rights reserved.
Page 134
Issue 18.s.- (22 May 2009)
Avaya Individual Power Supply
Avaya provides individual power supplies that can be used to power each IP phone which provides a single 48
volt output. The power supply can operate globally within a wide range of Alternating Current (AC) input
voltages: 90 - 264 Volts Alternating Current (VAC), 47-63 Hz. This power supply has a green indicator (LED)
that shows the unit has power to the PHONE socket on pins 7&8 of the CAT5 cable.
volt output. The power supply can operate globally within a wide range of Alternating Current (AC) input
voltages: 90 - 264 Volts Alternating Current (VAC), 47-63 Hz. This power supply has a green indicator (LED)
that shows the unit has power to the PHONE socket on pins 7&8 of the CAT5 cable.
This item is available in two different versions, with and without an internal battery for uninterrupted power to
the phone.
the phone.
1151 local power supply, without battery and with battery backup
Avaya Mid-Span Power Distribution Units
These power devices are designed for IP-telephony and provide power over Ethernet (PoE) for up to 24 IP
telephones or wireless LAN (WLAN) access points in one unit. The Mid Span Power units are designed to mount
in a 19-inch rack with the data equipment or they can be stacked up to four units high using the optional
rubber feet. The mid-span is 1U in height (1.75 inches) and has up to twenty-four RJ45 sockets on the bottom
row and twenty-four data and power output RJ45 sockets on the top row. The units provide a maximum of 200
Watts or a peak of 16.8 watts per port. Data is unaffected by power delivery, if the device does not require
power. The mid-span power units are also referred to as PDU (Powered Data Unit) devices. Power over the
LAN will simplify the installation and support of IP telephones for our customers and are available in 3 sizes; 6,
12 or 24 ports with optional SNMP management capability.
telephones or wireless LAN (WLAN) access points in one unit. The Mid Span Power units are designed to mount
in a 19-inch rack with the data equipment or they can be stacked up to four units high using the optional
rubber feet. The mid-span is 1U in height (1.75 inches) and has up to twenty-four RJ45 sockets on the bottom
row and twenty-four data and power output RJ45 sockets on the top row. The units provide a maximum of 200
Watts or a peak of 16.8 watts per port. Data is unaffected by power delivery, if the device does not require
power. The mid-span power units are also referred to as PDU (Powered Data Unit) devices. Power over the
LAN will simplify the installation and support of IP telephones for our customers and are available in 3 sizes; 6,
12 or 24 ports with optional SNMP management capability.
Mid-Span power supply