Avaya IP Office User and Administration CD Set 4.2 700459332 Manuel D’Utilisation

Product Description
IP Office 4.2

© 2009 AVAYA All rights reserved.

Page 30

Issue 18.s.- (22 May 2009)

IP500 daughter trunk cards can be fitted to existing IP500 base cards to provide support for trunk ports. The
daughter card uses the ports provided on the base card for cable connection.  The addition of an IP500
daughter trunk card is supported on IP500 Digital Station, IP500 Analog Phone and IP500 VCM base cards.
They are not supported on the IP500 Legacy Card Carrier base card.

 

For those base cards that support daughter cards, there are no restrictions on the combination of card types.
However in systems with both Analog Phone 8 base cards and analog trunk daughter cards, combining the two
types are recommended as it then provides analog power failure support for one trunk/extension (Not
applicable to the Analog Phone 2 base card).

Each daughter card is supplied with the spacer pegs required for installation and a label to identify the card's
presence on the physical unit once installed.

· IP500 Analog Trunk Card (Maximum 4).

· IP500 BRI Trunk Card (Maximum 4).

· IP500 Universal PRI Trunk Card (Maximum 4).

 

This card can be added to an IP500 Digital Station card, IP500 Analog Phone base card, or IP500 VCM card. It
allows that card to then also support 4 analog loop-start trunks. It also provides one analog V.32 modem.

 

· When fitted to an IP500 Analog Phone 8 base card, the combination supports 1 power failure extension

to trunk connection.