Fujitsu TX200 S3 Manuel D’Utilisation

If you would like to order internal HDDs and internal backup devices, please order optional cards/cables according to the following table.

Standard Drive Cage

(6bays)

Standard Drive Cage

(6bays)

(''1) USB Backup Devices: PG-DT504

(''2) SCSI Wide Backup Devices: PG-LT302/PG-LT201/PGBLT201C1/PG-LT102

(''3) If you order internal backup devices by CTO, SCSI cable is attached with backup devices.

HDD SAS 15k 73GB hot plug 3.5inch

SAS Controller

PG-HDB75A

( installed as standard )

PGBHDB75A (for CTO)

*. In case that SAS Controller installed

   as standard is used for RAID configuration,

HDD SAS 15k 147GB hot plug 3.5inch

   only 2 HDDs of same capacity and same

Internal HDD Unit Bay

PG-HDB45A

   rpm can be connected.

Conversion kit

PGBHDB45A (for CTO)

*. RAID1 configuration can be set.

PG-BC103

*. Hot spare disk cannot be set.

HDD SAS 15k 300GB hot plug 3.5inch

PG-HDB35A

PGBHDB35A (for CTO)

*. When Internal HDD Unit Bay Conversion kit

SAS RAID Ctrl

   (PG-BC103) is applied, up to 8 Internal HDDs

(without BBU)

   can be mounted but internal backup devices

PG-140F

   cannot be mounted on 5inch Bays.

PGB140F (for CTO)

*. RAID 0/1/5/1+0 configuration can be set.

   To set RAID configuration, two or more HDDs

   which are same capacity and same rpm

   should be connected to SAS Controller

   installed as standard.

SAS RAID Ctrl

(with BBU)

PG-140G

PGB140G (for CTO)

*. RAID 0/1/5/1+0 configuration can be set.

   To set RAID configuration, two or more HDDs

   which are same capacity and same rpm

   should be connected to SAS Controller

   installed as standard.

SAS RAID Ctrl (PG-140F/PG-140G)
( SAS Controller (standard) )

When Internal HDD Unit Bay
Conversion kit (PG-BC103) is
applied. (+2bays)

When Internal HDD Unit Bay
Conversion kit (PG-BC103) is
applied. (+2bays)

 

Drive Cage

-

(not connect)

RAID

SAS Controller (standard)
*. In case that SAS Controller installed as standard
   is used for RAID configuration, only 2 HDDs of same
   capacity and same rpm can be connected.

Type of HDD connection

Interface

SAS Controller (standard)
*. Only SAS Configuration is supported.

Onboard USB

(internal port)

SAS RAID Ctrl (PG-140F/PG-140G)
( SAS Controller (standard) )

SAS /

RAID

Internal Backup Devices PRIMERGY TX200 S3

SCSI Card (PG-1281/PGB1281)
SCSI Cable (PG-CBLS025)  (''3)

Onboard USB

(internal port)

Connection

SCSI Card (PG-1281/PGB1281)
SCSI Cable (PG-CBLS025)  (''3)

-

(not connect)

USB (''1) Connection

SCSI Wide (''2) Connection

-

(not connect)

-

(not connect)

PCI Bus

PCI Bus