Epson EB-Z9900W Manuel D’Utilisation
a
• You can only enter single-byte alphanumeric characters and symbols.
• The following functions cannot be used while using Crestron
• The following functions cannot be used while using Crestron
RoomView
®
.
Message Broadcasting (EasyMP Monitor plug-in)
s
• If you set Standby Mode to Communication On, you can control
the projector even if it is in standby mode (when the power is
off).
off).
s
Extended - Standby Mode
Operating the projector from the computer
Displaying the operation window
Check the following before carrying out any operations.
• Make sure the computer and projector are connected to the network.
• Make sure the computer and projector are connected to the network.
• Set Crestron RoomView to On in the Network menu.
s
Network - Others - Crestron RoomView
a
Start the Web browser on the computer.
b
Enter the IP address of the projector in the address input box of
the Web browser, and press the Enter key on the computer's
keyboard.
the Web browser, and press the Enter key on the computer's
keyboard.
The operation window is displayed.
Using the operation window
A
You can perform the following operations when you click the buttons.
Button
Function
Power
Turns the projector power on or off.
A/V Mute
Press to turn the image on or off temporarily.
s
B
Switch to the image from the selected input source. To display input sources that
are not shown in Source List, click (a) or (b) to scroll up or down. The current
image signal input source is displayed in blue.
You can change the source name if necessary.
are not shown in Source List, click (a) or (b) to scroll up or down. The current
image signal input source is displayed in blue.
You can change the source name if necessary.
Monitoring and Controlling
194