Echo SRM-410U Manuel D’Utilisation

Page de 36
16
o
peratIon
  
 WARNING
Moving parts can amputate fingers or cause severe injuries.  Keep hands, clothing and loose objects away from all 
openings.  Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete 
stop before removing obstructions, clearing debris, or servicing unit.
  
  WARNING 
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas.  Breathing CO can cause unconscious-
ness, serious injury, or death. Exhaust can cause serious burns.   ALWAYS position unit so that exhaust is directed 
away from your face and body.
  
  WARNING
Operation of this equipment may create sparks that can start fires around dry vegetation. This unit is equipped with 
a spark arrestor and a spark arrestor may be required.  The operator should contact local fire agencies for laws or 
regulations relating to fire prevention requirements.
blade
 
selectIon
  
  WARNING      
The type of Blade used MUST be matched to the type and size of material cut.  An improper or dull blade can cause 
serious personal injury.  Blades MUST be sharp.  Dull blades increase the chance of kick-out and injury to yourself 
and bystanders.
SRM/PAS/SB BLADE SET-UP GUIDE*
TO USE
THESE BLADES 
Pro Maxi-Cut
Grass/Weed
Plastic Cutters
Rigid Plastic 
Tri-Cut
Grass/Weed Blade 
Metal
Tri-Cut/8 Tooth 
Grass/Weed Blade 
Metal 80T Brush Blade
Metal 22T Clearing Saw Blade 
Handle
Loop Handle, w/or
w/o Barrier Bar
Loop Handle 
w/Barrier Bar,
 or U-Handle 
Loop Handle 
w/Barrier Bar,
 or U-Handle 
U-Handle
Debris Shield
Metal Shield
Metal Shield
Metal Shield
Metal Shield
Harness
Shoulder Harness
Shoulder Harness
Shoulder Harness
Shoulder Harness****
Upper Plate & 
Flat Washer
Upper Plate 
& Glide Cup
Upper/Lower
Blade Plates**
Upper/Lower
Blade Plates**
Hex Nut 
Hex Nut 
Hex Nut 
Hex Nut 
You
must
install
these
parts!
Blade
Mounting
Hardware
New Cotter Pin*** 
New Cotter Pin*** 
New Cotter Pin*** 
New Cotter Pin*** 
*
WARNING!  DO NOT INSTALL BLADES ON GT (CURVED SHAFT) MODEL TRIMMERS
** Arbor diameter of Upper Blade Plate must match arbor diameter of metal blades.
*** New cotter pin required each time blade is installed.
**** Brushcutters over 16.5 lbs (7.5 kg) dry weight (weight w/o fuel) require a double shoulder harness
J:\Safety Manuals\Trimmer Safety Manual_\SRM_PAS_SB BLADE SET UP Guide 10-23-06.doc