Echo SRM-410U Manuel D’Utilisation

When engine is started, confirm that there is not any abnormal 

vibration or  sound.   If there is abnormal vibration or sound, ask 

your DEALER to repair. After refueling tighten fuel cap firmly and 

check for leakage. In case of fuel leakage repair before starting 

operation since there is a danger of fire.

1.  Stop Switch 

Move stop switch button (A) forward away from the STOP posi-

tion.

2.  Choke
 

Move choke lever (B) to Cold Start Position  (

).

3.  Purge Bulb

     Pump purge bulb (C) until fuel is visible and flows freely in the 

clear fuel tank return line. Pump bulb an additional 4 or 5 times.

4.  Press the decompression device (E).

5.  Recoil Starter

Lay the unit on a flat area and keep movable attachment parts clear 

of all obstacles. Hold unit firmly, and rapidly pull recoil starter 

handle/rope (D) until engine fires (or maximum five [5] pulls).

Starter handle : Use short pulls - only 1/2 - 2/3 of starter rope for 

starting. Do not let starter rope snap back in. 

Always hold the unit firmly.

6.  Choke

 

After engine fires (or 5 pulls), move choke lever back to Run 

 ( ) position.  Pull recoil starter starter handle/rope until engine 

starts and runs. Allow unit to warm up at idle for several minutes.

If engine does not start with choke in “Run” position after 5 pulls, 

repeat instructions 2 - 5.

7.  Throttle Trigger

 

After engine warm-up, gradually depress throttle trigger to increase 

engine RPM to operating speed.