Epson 20020 Manuel D’Utilisation

3. Remove the card from the slot (pull it straight up) and set

it on a soft surface with the components facing up. The

location of the jumpers is shown below. Change them as
needed and then reverse the three steps above to reinstall

it.

If you need to remove an option card, simply reverse the steps

you followed to install it. Remove the screw securing the card

to the back of the computer and pull the card straight up and

out of the slot. Then carefully wrap the card, preferably in the
original packing materials, and place it inside its box for safe

storage. Cover the end of the empty option slot with the
original metal cover and secure it with the retaining screw.