Epson 20020 Manuel D’Utilisation

4. Press Y and 

Enter 

to begin formatting the extended

partition. The screen continuously displays the changing
head and cylinder numbers. When the procedure is
complete, you see the following message:

Format Complete

Volume Label (11 characters, ENTER

for none)

5. It is a good idea to enter a name (volume label) for drive D,

to protect it from being accidentally reformatted later. If

you want to do this, type up to 11 characters and press

Enter. 

If you do not want to name it, just press 

Enter.

The screen displays.information about the total disk space

available on drive D. The 

A> 

prompt reappears.

6. If you have created additional logical drives on your hard

disk, repeat steps 1 through 5 above for each additional

logical drive. Substitute the appropriate drive letter in the
FORMAT command. For example, to format drive E, type

the following and press 

Enter:

FORMAT E: /V

Follow the instructions below to copy the files on your other
MS-DOS diskettes and the Reference diskette to drive C, the
primary partition on the hard disk:

1. Remove the MS-DOS Startup diskette from drive A and

insert the diskette labelled Operating 1 in the drive.

2. You should still be logged onto drive A. If not, type 

A: 

and

press 

Enter.

Preparing a Hard Disk for Use

E-9