Tanaka HTD-2522PF Manuel D’Utilisation

 
 

 

www.tanaka-usa.com                                                         11                                              custsvc@tanaka-ism.com

 

Owner’s Manual 

 

THT-210/210S/2000/2100/2120/2520, THT-240/2510/2530/2540/262

HTD-2520PF/2522PF/2526PF/2530PF, HTS-2530PF

Below you will find some general maintenance instructions. 
For further information please contact your service dealer. 

 
Daily maintenance 

•  Clean the exterior of the unit. 
•  Check the blade guard for damage or cracks. Change the guard in case of impacts or cracks. 
•  Check that the blade is sharp, and without cracks. 
•  Check that the blade nut is sufficiently tightened. 
•  Make sure the blade transport guard is undamaged and that it can be securely fitted. 
•  Check that nuts and screws are sufficiently tightened. 

 
Weekly maintenance 

•  Check the starter, especially cord and return spring. 
•  Clean the exterior of the spark plug. 
•  Remove it and check the electrode gap. Adjust it to 0.6 mm, or change the spark plug. 
•  Clean the cooling fins on the cylinder and make sure the air intake at the starter is not clogged. 
•  Check that the angle gear is filled with grease. 
•  Clean the air filter. 

•  Rinse the fuel tank with gasoline. 
•  Clean the exterior of the carburetor and the space around it.  
•  Clean the fan and the space around it.