HP (Hewlett-Packard) 2300c Series Manuel D’Utilisation

Set up your scanner in one of two ways: either install the software first or connect 
the scanner first. It is recommended that you install the software first, especially on 
a Macintosh computer.

Close all open programs on your computer.

Locate the HP Photo & Imaging software CD-ROM that is appropriate for 
your language and operating system and insert it into your computer. 

For a Microsoft Windows computer: Follow the instructions on the screen. 
Or, if the installation program does not start automatically: 
a. On the Start menu, click Run.
b. Type: 

x:setup.exe

 (where x is the letter of the CD-ROM drive).

For a Macintosh computer (HP Scanjet 3500c series only): Double-click the 
Installation Read Me file on the CD-ROM and follow the instructions.

If the instructions prompt you to shut down your computer, do so.

Connect the USB cable between the USB port on the scanner and the USB 
port on the computer.

Connect the power cable between the scanner and a surge protector or a 
grounded wall outlet that is easy to reach. This turns on the scanner.

If necessary, turn your computer on again.

Make sure that your computer is on and that the operating system is 
running.

Connect the USB cable between the USB port on the scanner and the USB 
port on the computer.

If you experience difficulty installing your scanner, see 

 on page 11

.

connect USB cable to scanner

connect USB cable to computer

usermanual.book  Page 2  Wednesday, January 16, 2002  3:52 PM