British Telecom Converse 2300 40209 Manuel D’Utilisation
Codes de produits
40209
If you experience any problems, please visit www.bt.com/producthelp
32
Wall mounting your phone
WARNiNG
Before you wall-mount your BT Converse 1300,
check that you are not drilling into any hidden
wiring or pipes.
Make sure the telephone line cord will reach the
Make sure the telephone line cord will reach the
wall socket.
Using the handset park when the
phone is wall-mounted
phone is wall-mounted
If you need to leave the phone whilst on a call,
hang the handset on the handset park at the top
left-hand side of the base.
1. Unclip stand from the base of the
phone and remove it. Re-route the
telephone line cord towards the
bottom of the phone.
telephone line cord towards the
bottom of the phone.
2. Drill two holes in the wall 75-80mm
vertically apart using an 8mm drill bit.
3. Insert the wall plugs if necessary then
insert the screws leaving about 5mm
protruding from the wall on which to
hang the phone.
protruding from the wall on which to
hang the phone.
4. Slot the holes on the back of the base over the screw heads and gently pull the
phone down to make sure it is securely in place.
WALL
WALL PLUG
SCREW
75-80 mm