NEC 50PD1 Manuel D’Utilisation

45

This allows the following settings: LONG LIFE MODE 1/
2/3 GRAY LEVEL, SET ID NO, and ALL RESET.

Icon (14)

The cursor is moved left and right with the POSITION
CONTROL

§ 

/ 

©

 buttons.

POSITION / CONTROL

Move up

Move down

Note: Selecting ALL RESET and pressing the
PROCEED button will display a warning screen and
pressing “PROCEED” further will change all the
settings of this screen to the initial values.

3. Press the ▲ / ▼ buttons and set

Select the various items with the left and right buttons

Burning reduction function
* LONG LIFE MODE 1: Switched ON/OFF with the

left and right buttons. (Initial value is OFF) 

→

 Holds

down the brightness of the screen.

* LONG LIFE MODE 2: Switched ON/OFF with the

left and right buttons. (Initial value is OFF) 

→

 Moves

the screen up, down, left, and right at fixed times.

* LONG LIFE MODE 3: Switched INV/WT/OFF with

the left and right buttons. (Initial value is OFF) 

→

Selecting “INV”displays the inverse image of the in
coming signal to reduce burn-in.

* Selecting “WT” displays the all white pattern to re-

duce image burn-in.

* GRAY LEVEL: Select 1 to 3 with the left and right

buttons. (Initial value is 1) 

→

 Adjusts the brightness

of the non-displayed portion of the screen.

* SET ID No.: Select 1 to 256 with the left and right

buttons. (Initial value is ALL) 

→

 Displays ALL with

the remote control or CLEAR button.

* To delete the main menu, press the EXIT button once

more.

EXIT

Previous Page Screen

Icon (15)

* Align the cursor with icon (15) at the very top to move

to the first page menu screen.

Notice - About RGB3 ADJ
If the image is not stable when in the RGB3 input mode,
switch the “RGB3 ADJ” number to 2 or 3.  (Select the
mode at which the display is stable.)
The display position will change when the number is
changed; therefore, when using the unit with “AUTO PIC-
TURE” ON, switch it OFF and then back ON again to re-
turn the display position to its original location.
When using the unit with “AUTO PICTURE” OFF,
please perform the display position adjustment again.

Note: The long life mode is designed to extend the
service life of the plasma panel and reduce ghost im-
ages.  It is not meant to prevent ghost images.
LONG LIFE MODE 2 cannot be set with multiple
screens operation.
Switching to GAMMA is not possible when LONG
LIFE MODE3 is set
LONG LIFE MODE 3: When the plasma monitor
is turned on or off, the INV. WT setting is set to
OFF and the last data is not stored in memory.