Sony SRX-R110 Manuel D’Utilisation

GB 

22

Projecting the Picture 

  

Ch
apt

er 3  Proj

ec
tin
g

Set the main power switch on the left side of the 

projector to the upper position.

The STATUS LAMP indicator lights red and the 
projector goes into standby mode.

Press the 

? button to turn on the projector.

The STATUS LAMP indicator lights green.

Select the screen mode.

Each time you press the SCREEN MODE button, the 
screen mode switches as follows:
1 (single-screen mode): Projects an image in full 

screen.

2 (dual-screen mode): Projects images in two divided 

screens. You can also project a different input 
source in each of the two screens.

4 (quad-screen mode): Projects images in four 

divided screens. You can also project a different 
input source in each of the four screens.

Turn on the equipment connected to the projector.

Press the INPUT SEL button to select the input source.

A: to select the input source from the equipment 

connected to the optional input board attached to 
the INPUT A section.

B: to select the input source from the equipment 

connected to the optional input board attached to 
the INPUT B section.

C: to select the input source from the equipment 

connected to the optional input board attached to 
the INPUT C section.

D: to select the input source from the equipment 

connected to the optional input board attached to 
the INPUT D section.

When you select “dual-screen mode” or 
“quad-screen mode” in step 3
Press one of the INPUT SEL A to D buttons to select 
the input source you want to project, then select one of 
the divided screens where you want to project the 
picture with the SCREEN SEL button.

When projecting moving pictures in multiple screens, 
all the input signals should be genlocked to 
synchronize with each other. A picture on the left 
screen for dual-screen mode or that on the upper left 
screen for quad-screen mode is regarded as a reference 
picture. The projected moving picture not 
synchronized with the reference picture appears 
incompatible with the moving pictures projected on 
other screens. If you project still pictures and moving 
pictures together, select the left screen for the moving 

picture in dual-screen mode or the upper left screen in 
quad-screen mode. If you project still pictures only, 
you may project them on any screen.

Adjust the focus with the FOCUS +/– buttons.

During adjustment, “FOCUS” appears on the screen.

Adjust the picture size with the ZOOM +/– buttons.

During adjustment, “ZOOM” appears on the screen.

Adjust the focus again with the FOCUS +/– buttons.

Adjust the vertical position of the picture with the 
SHIFT +/– buttons.

During adjustment, “SHIFT” appears on the screen.

The FOCUS, ZOOM and SHIFT indications do not appear 
when you select “OSD OFF” in the Control Function 
Menu window of the computer.

Press the MUTING button. 
To restore the picture, press the MUTING button again.

Press the 

1 button.

The STATUS LAMP indicator flashes green and the 
fan continues to run for 10 minutes to reduce the 
internal heat. When the fan stops running, the 
STATUS LAMP indicator lights red.

Set the main power switch to the lower position.

Do not set the main power switch to the lower position 
while the fan is running. Doing so stops the fan before 
the inside of the projector has been cooled down 
sufficiently and may damage the unit.