Polycom (RMX) 1500 Manuel D’Utilisation

Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide 

Polycom, Inc.

The RMX Manager can connect to one or several RMXs simultaneously. If the site’s 

configuration includes more than one MCU, or when a new MCU is added to your 

configuration, and you want to monitor and control all MCUs from within the same 
window, you must add the MCU to the MCUs list. 

To add the MCU to the list of MCUs being managed, define the MCU’s connection 

parameters.
To add a RMX unit:

On the MCUs toolbar, click the Add MCU 

 button to add an MCU to the MCU list.

The Add MCU dialog box opens.

Define the following parameters:

     

The RMX must be installed and its IP addresses properly configured in the Management Network 
Service before defining its connection parameters in the RMX Manager application.

Enter the name of the MCU on the network.

Enter the IP address of the MCU’s Control Unit. The IP address must be 
identical to the one configured in the MCU during first entry Configuration. 
For more details, see the RealPresence Collaboration Server 1500/2000/
4000 Getting Started Guide, "Modifying the Factory Default Management 
Network Settings on the USB Key” on page

.

Enter the number of the port used for communication and data 
transactions between the RMX unit and the RMX Manager.
For standard connection, enter 80.
For a Secured connection (using TLS or SSL), enter 443.

Enter the user name with which you will login to the MCU. A User with 
this name must be defined in the RMX Users list. The system is shipped 
with a default User whose name is POLYCOM.