Husqvarna 323HE3 Manuel D’Utilisation
English
– 17
WORKING TECHNIQUES
•
Tighten the knob.
(325HE3,325HE4)
•
Loosen the knob on the shaft (clockwise).
•
Press the cutting unit against the hedge or some other
firm surface until the required angle is set.
firm surface until the required angle is set.
•
Turn the knob (anti-clockwise).
Transport position
(325HE4)
Once the work has been completed fold the cutting unit back
against the shaft to simplify transport and storage of the
hedge trimmer.
against the shaft to simplify transport and storage of the
hedge trimmer.
1
Turn off the engine.
2
Fit the transport guard to the cutting attachment.
3
Loosen the knob on the shaft (clockwise).
4
Grip the handle on the cutting unit and angle the cutting
unit upwards. At an angle of 90 degrees there is a stop
position. To pass the stop position, pull out the lock button.
unit upwards. At an angle of 90 degrees there is a stop
position. To pass the stop position, pull out the lock button.
5
Fold down the cutting unit against the shaft.
6
Turn the knob (anti-clockwise).
CAUTION! When the stop position has been passed the
blades are blocked, do not try to cut with the cutting unit in this
position.
blades are blocked, do not try to cut with the cutting unit in this
position.
!
WARNING! Do not hold the cutting head
when you adjust the angle. The blades are
sharp and you could easily cut yourself.
when you adjust the angle. The blades are
sharp and you could easily cut yourself.