Dolmar MS-230 C Manuel D’Utilisation

7

-  The brushcutter must be safely stored in a dry room. Use the 

tool protection for metal cutting tools. Keep the brushcutter out 

of reach of children.

-  If the brushcutter is stored for a long period of time, it should be 

given a thorough maintenance check and a complete inspection 

at an authorized DOLMAR service centre.

-  If the brushcutter is stored for a long period of time, the fuel 

tank should be completely emptied and the carburetor run dry. 

Fuels may only be stored for a limited period of time and could 

cause deposits to form in the tank or in the carburetor.

-  Fuel remains in reserve canisters should be used for other 

engines or disposed of.

-  Always make sure the brushcutter is in good working order 

before  using  it.  This  includes  in  particular  the  cutting  tool, 

guard, harness and fuel system (check for leaks). Particular 

attention must be paid to the cutting blades, which must be 

correctly sharpened.

CaUTIon: Metal cutting tools must be sharpened only at an 

this, the equipment may be damaged due to vibrations.
-  When changing the cutting tool, cleaning the brushcutter and 

the cutting tool etc., it is essential to switch off the engine 

and pull the spark plug cap.

-  Replace  cracked,  bent,  warped,  damaged  or  dull  cutting 

tools immediately. Never straighten or weld damaged cutting 

tools.

-  Operate the brushcutter with as little noise and pollution as pos-

sible. In particular check the correct setting of the carburetor.

-  Clean the brushcutter at regular intervals and check that all 

screws and nuts are well tightened.

-  Never service or store the brushcutter near open flames (16)!
-  Always store the brushcutter in a locked storage area, with the 

fuel tank completely empty and the carburetor run dry.

putting your own safety at risk!
The performance of maintenance or repair work by the user is limited 

to those activities described in this instruction manual. All other 

work must be done by the DOLMAR customer service (17).
Use only original DoLMar spares and accessories.
The use of non-DOLMAR spares, accessories, or cutting tools 

increases the risk of accident. DOLMAR will not accept any liability 

for accidents or damage caused by the use of non-approved cutting 

tools and fixing devices of cutting tools, or accessories.

A  first-aid  kit  should  always  be  nearby  as  a  precaution  in  the  

event of an accident.
Immediately replace any items taken from the first aid kit.
when calling for help, give the following information:
Place of accident, what happened, number of persons injured, 

nature of injuries, your name.
noTE
Individuals with poor circulation who are exposed to excessive 

vibration may experience injury to blood vessels or the nervous 

system. Vibration may cause the following symptoms to occur in 

the fingers, hands or wrists: ”Falling asleep” (numbness), tingling,

pain, stabbing sensation, alteration of skin colour or of the skin. If 

18

17

16

19