Lexmark X543dn Mode D'Emploi
Setting up the address book
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
in the TCP/IP section.
2
Click Settings.
3
Click E-mail Settings.
4
Click Manage E-mail Shortcuts.
5
Change the e-mail settings as needed.
6
Click Submit.
Creating an e-mail shortcut using the Embedded
Web Server
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
in the TCP/IP section.
2
Click Settings.
3
Click Manage Destinations.
Note: You may be asked to enter a password. If you do not have an ID and password, get one from your system
support person.
support person.
4
Click E-mail Destination Setup.
5
Type a unique name for the recipient, and then enter the e-mail address.
Note: If you are entering multiple addresses, separate each address with a comma (,).
6
Select the scan settings (Format, Content, Color, and Resolution).
7
Enter a shortcut number, and then click Add.
If you enter a number that is already in use, you are prompted to select another number.
E-mailing a document
Sending an e-mail using the keypad
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
E-mailing
70