Wasp WLS9500 Mode D'Emploi

Symbologies 7-29

To clear the transmission buffer, scan the Clear Buffer bar code below, which contains only a start character, a dash 
(minus), and a stop character.

•

The scanner issues a short high/low/high beep.

•

The scanner erases the transmission buffer.

•

No transmission occurs.

Because the Clear Buffer contains only the dash (minus) character, set the Code 39 length to 
include length 1 before scanning this bar code.

There are two methods to transmit the Code 39 buffer.

1. Scan the Transmit Buffer bar code below which contains only a start character, a plus (+), and a stop character.

• The scanner transmits and clears the buffer.
• The scanner issues a low/high beep.

2. Scan a Code 39 bar code with a leading character other than a space.

• The scanner appends new decode data to buffered data.
• The scanner transmits and clears the buffer.
• The scanner signals that the buffer was transmitted with a low/high beep.
• Scanner transmits and clears the buffer.

Because the Transmit Buffer contains only a plus (+) character, set the Code 39 length to include 
length 1 before scanning this bar code.