Panasonic KX-TG4500 Mode D'Emploi

104

For assistance, please visit http://www.panasonic.com/phonehelp

I cannot program function 
items, such as the dialing 
mode.

L

Programming is not possible while the base handset is 
off the cradle or the {SP-PHONE} indicator lights.

L

Programming is not possible while in talk or intercom 
mode, or while listening to the messages.

L

Do not pause for over 60 seconds while programming.

L

Make sure that the cordless handset is in standby 
mode.

While programming, the 
unit/cordless handset 
starts to ring.

L

A call is being received. Answer the call and re-start 
programming from the beginning after hanging up.

I can’t access the 
cordless handset function 
menu.

L

Access is not possible during a call, or while accessing 
a mailbox, the Caller List, or the Phonebook.

Static is heard, sound 
cuts in/out. Interference 
from other electrical units.

L

Move the cordless handset(s) and the base unit away 
from other electrical appliances (page 9).

L

Move closer to the base unit.

L

Raise the base unit antenna.

L

If your unit is connected to a telephone line with DSL 
service, we recommend connecting a noise filter 
between the base unit and the telephone line jack. 
Contact your DSL provider for details.

The unit/cordless 
handset does not ring.

L

The ringer volume is set to OFF. Select HIGH, 
MEDIUM, or LOW (page 79).

L

If four cordless handsets are in use, the unit may not 
ring. The cordless handset users will hear incoming call 
tone.

L

The base unit/cordless handset is removed from the 
ring group. Add to the ring group (page 81).

L

All lines have been set-up to be answered by the 
automated attendant (page 66).

I cannot make a call.

L

The dialing mode may be set incorrectly. Set the dial 
mode (page 25) to match the type of telephone service 
you have (tone or pulse).

L

The dialed number is restricted (page 84).