ZyXEL P-660HW-D1 Mode D'Emploi

Prestige 660H/HW Series User’s Guide

99 

Chapter 7 Wireless LAN (Prestige 660HW)

In a wireless network, the wireless clients must have the same SSID and security settings as 
the access point (AP) or wireless router (we will refer to both as “AP” here) in order to 
associate with it. Traditionally this meant that you had to configure the settings on the AP and 
then manually configure the exact same settings on each wireless client.

OTIST (One-Touch Intelligent Security Technology) allows you to transfer your AP’s SSID 
and WEP or WPA-PSK security settings to wireless clients that support OTIST and are within 
transmission range. You can also choose to have OTIST generate a WPA-PSK key for you if 
you didn’t configure one manually.

Note: OTIST replaces the pre-configured wireless settings on the wireless clients.

You must enable OTIST on both the AP and wireless client before you start transferring 
settings.

Note: The AP and wireless client(s) MUST use the same Setup key.

You can enable OTIST using the Reset button or the web configurator. 

Shared Secret

Enter a password (up to 31 alphanumeric characters) as the key to be 

shared between the external authentication server and the access points. 
The key is not sent over the network. This key must be the same on the 

external authentication server and Prestige. 

Accounting Server

Active

Select Yes from the drop-down list box to enable user authentication 

through an external accounting server. 

Server IP Address

Enter the IP address of the external accounting server in dotted decimal 

notation. 

Port Number

The default port of the RADIUS server for accounting is 1813. 
You need not change this value unless your network administrator instructs 

you to do so with additional information. 

Shared Secret

Enter a password (up to 31 alphanumeric characters) as the key to be 

shared between the external accounting server and the access points. 
The key is not sent over the network. This key must be the same on the 

external accounting server and the Prestige. 

Back

Click Back to go to the main wireless LAN setup screen. 

Apply

Click Apply to save these settings back to the Prestige. 

Cancel

Click Cancel to begin configuring this screen again. 

Table 23   RADIUS (continued)