Enterasys csx400 Mode D'Emploi

2-4

Local Management User’s Guide

WAN INT CONFIG (Command) —

When this field is highlighted and the ENTER key is pressed, 

the WAN Interface Configuration screen displays. Refer to the 

REMOTE SETUP (Command) —

Used to access and modify remote profiles information.

RETURN (Command) —

Returns user to the previous screen in the hierarchy.

Displays the HDSL Transmit Clock Source. The selections for this 

field toggle between Loop-Timing (Extracted Line Data) and Local-Timing (Internal Clock). The 
default setting for this field is Loop-Timing.

This is set to test the local loop for error conditions for the WPIM-HDSL. 

The available options are: NLOC, NREM, CLOC, CREM, CDU1, CDU2, NDU1, NDU2, and 
None. The field defaults to None.

For more information, see the Cabletron Enterprise WAN MIB ctwan-mib.txt for the HDSL 
loopback option information

Displays the timeslot configuration for the WPIM-HDSL. The 

selections for this field toggle between Full and Fractional. The default setting for this field is Full. 
Full uses all 24 timeslots and Fractional uses the first 12 timeslots.

The Loop-Timing selection in this Local Management screen corresponds to the Slave 
selection in the QuickSET HDSL WAN Configuration window; the Local-Timing 
selection corresponds to the Master selection.